Installing the Signature Autosports Off-Road Ditch Light Brackets on your Ineos® Grenadier® or Quartermaster® is a great way to enhance your vehicle's light capability, night-time visibility, and add functional style. Here's a step-by-step guide to help you with the installation:

Tools and Materials Needed

• T45 Torx-bit
• #5 Allen Key
• Cleaning cloth
• Safety glasses and gloves

 

Installation Steps:

1. Preparation:
• Park your Ineos® Grenadier® on a flat surface and engage the parking brake.
• Lay out all the components of the ditch light brackets. Check for any missing parts.

2. Crack loose the (4) T45 Torx bolts at the upper hood hinge under the windshield on both the driver and passenger sides of the vehicle while leaving them threaded.
3. Remove the T45 Torx-screws from the Factory Hood mount location ONE at a time! Replace each bolt individually, while mounting the bracket in place. This way, your hood alignment does not get distorted just for good measure.
4.Clean the mounting area on the vehicle where the ditch light brackets will lay.
5. Once all (4) torx bolts have been replaced with the provided #5 Stainless Steel hardware with brackets installed, tighten down snug. 

 























































Tip: If the hole for the light mount is too small, you can drill it out to the size needed. Aluminum is an easy material to drill.











Final Inspection: 
Once all bolts are tightened, inspect the installation for any movement or misalignment.Ensure that all tools and materials are removed from the work area. 

Maintenance Tips
• Periodically check the tightness of the bolts after installation, especially after off-road use.
• Clean regularly to maintain appearance. 

You’re now ready to hit the trails with your newly installed Ditch Light Brackets! If you encounter any issues during installation, refer to the manufacturer’s instructions or consult a professional. Now go outside and enjoy your adventures!

IMPORTANT: If you are not confident installing this product yourself, please seek a professional to complete the installation.  

Disclaimer for Automotive Product Self-Installation: By choosing to install this automotive product yourself, you acknowledge and accept the following terms, and by proceeding with the installation, you accept these terms and acknowledge that you do so at your own risk.:
• Skill and Knowledge: You confirm that you have the necessary skills, knowledge, and tools to perform the installation safely and correctly. If you are unsure, we recommend seeking professional assistance.
• Use of Product: This product is intended for use as specified by the manufacturer. Improper installation may lead to malfunctions, damage to your vehicle, or personal injury.
• Warranty Limitations: Self-installation may void any warranties associated with the product or your vehicle. Please review the warranty details before proceeding.
• Liability Waiver: The manufacturer and seller are not liable for any damages, injuries, or losses resulting from improper installation or use of the product.
• Compliance with Laws: You are responsible for ensuring that your installation complies with all local laws and regulations.