top of page
Installing Signature Autosports Off-Road Light Guards on your Ineos® Grenadier® or Quartermaster® is a great way to enhance your vehicle's protection and add functional style. Here's a step-by-step guide to help you with the installation:
Tools and Materials Needed
• T30/T25 Torx-bit
• Cleaning cloth
• Safety glasses and gloves
Headlight Guards
Installation Steps:
1. Preparation:
• Park your Ineos® Grenadier® on a flat surface and engage the parking brake.
• Lay out all the components of the light guards. Check for any missing parts.
2. Remove the (4) Four T30 Torx-screws from the Factory plastic.
3.Clean the mounting area on the vehicle where the guards will attach. Remove any dirt or debris to ensure a secure fit.
4. While matching each labeled guard with its respective side (D: Driver Side, P: Passenger Side), place your guard and align the holes. 5. Reinsert your (4) Four T30 Torx-screws and ensure solid alignment.
Taillight Guards Installation Steps:
1. Preparation:
Park your Ineos® Grenadier® on a flat surface and engage the parking brake. Lay out all the components of the light guards. Check for any missing parts.
2. Clean the mounting area on the vehicle where the guards will attach. Remove any dirt or debris to ensure a secure fit.
3. Once the surface area surrounding your taillights has been cleaned and dried, remove the 3M adhesive strip exposing the 3M backing. Ensure alignment with your vehicle, and firmly press down for 30 seconds to a minute to apply the adhesive backing.
4. While matching each labeled guard with its respective side (D: Driver Side, P: Passenger Side), place your guard and align the holes.
***Tip: Grenadier Taillight Guards are side specific, as Quartermaster Taillight Guards are not side specific.
Installation Instructions
Signature Autosports Offroad Gear
Light Guards for the Ineos® Grenadier® and Quartermaster®
SKU: SAS-FLG/GLG/RLG
Grille Light Guards Installation Steps:
1. Preparation:• Park your Ineos® Grenadier® on a flat surface and engage the parking brake.• Lay out all the components of the light guards. Check for any missing parts.
2. Begin by carefully removing the weather stripping above the grille. Pull the stripping side to side when removing off of plastic clips
**Tip: when reinstalling weather stripping later, remove clips from vehicle and install into the stripping first. Then reapply stripping.
3. Remove the (4) Four T30 Torx-screws from the Factory plastic Headlight plastic cover.
4. After removing the Headlight cover, remove the (4) torx-screws releasing the headlight surround. Once these screws are removed, carefully pull the headlight surround towards the center of the vehicle and out.
5. Next, remove the 4 torx-screws holding on the grille.
6. Repeat these steps on the other side of the vehicle.
7. Once you have both headlight surround assemblies removed and both sides of grille hardware removed, move to the top of the grille and remove the upper torx-screws.
8. With the top of the grille unbuttoned, now remove the lower (4) torx-screws. There will be an additional (2) screws to remove directly under those lower (4).
9. Your grille should now remove freely. If you are fully removing the grille from the vehicle, unplug your foglight connections before removal.
10. Your Grille Light Guards will have two forks sticking off the back. One is longer than the other. Make sure the longer of the forks faces the outside of the vehicle per side.
11. Feel free to gently stretch the forks apart to wrap through the grille. Then, press together to securely fit to the screw width.
12. On the back side of your fog lights there will be (2) T25 torx-screws. Slightly back them out so the light guard forks can slide behind the bolt heads. Once the forks slide between the bolt head and the light, wrapping the bolt thread, secure the forks down with the torx-screws.
13. Double check guard alignment and that they are firm to the grille.
14. Repeat steps 1-8 in reverse to reinstall your grille.
Final Inspection:
• Once all bolts are tightened, inspect the installation for any movement or misalignment.
Ensure that all tools and materials are removed from the work area.
Maintenance Tips
• Periodically check the tightness of the bolts after installation, especially after off-road use.
• Clean regularly to maintain appearance.
You’re now ready to hit the trails with your newly installed Light Guards! If you encounter any issues during installation, refer to the manufacturer’s instructions or consult a professional. Now go outside and enjoy your adventures!
IMPORTANT: If you are not confident installing this product yourself, please seek a professional to complete the installation.
Disclaimer for Automotive Product Self-Installation
By choosing to install this automotive product yourself, you acknowledge and accept the following terms, and by proceeding with the installation, you accept these terms and acknowledge that you do so at your own risk.:
• Skill and Knowledge: You confirm that you have the necessary skills, knowledge, and tools to perform the installation safely and correctly. If you are unsure, we recommend seeking professional assistance.
• Use of Product: This product is intended for use as specified by the manufacturer. Improper installation may lead to malfunctions, damage to your vehicle, or personal injury.
• Warranty Limitations: Self-installation may void any warranties associated with the product or your vehicle. Please review the warranty details before proceeding.
• Liability Waiver: The manufacturer and seller are not liable for any damages, injuries, or losses resulting from improper installation or use of the product.
• Compliance with Laws: You are responsible for ensuring that your installation complies with all local laws and regulations.
bottom of page